Aklaska Channing 111 Stoker With Crosslink Conversion

Please use the Forum of conversations about Cross Link Conversions' boiler systmes

Aklaska Channing 111 Stoker With Crosslink Conversion

Postby bmdetesta » August 20th, 2015, 4:30 pm

Has anyone installed a crosslink conversion in an alaska channing 111 coal stokers? thanks bmdetesta
bmdetesta
 
Posts: 8
Joined: April 27th, 2011, 12:55 am

Re: Aklaska Channing 111 Stoker With Crosslink Conversion

Postby tommy » November 1st, 2015, 10:57 am

Is your install done how does it work ?
User avatar
tommy
 
Posts: 264
Joined: February 24th, 2011, 11:33 pm
Location: Mn

Re: Aklaska Channing 111 Stoker With Crosslink Conversion

Postby bmdetesta » November 3rd, 2015, 5:06 pm

Hey Tom


Still working on getting all of the parts together.

Going to use a Taco V T 2218 pump waiting for it to come in.
IIt is a Detla 10 pump. it is suppose to be an upgrade for the bumble bee
with other options

In the mean time i have been putting a roof on huge house while working midnight shift

I will keep you posted as we go along


Still have to get heat exchanger and side arm for hot water

Using black pipe 3/4 inch off of kit to 1 inch pex. Looking to use heat exchanger with 1 inch fittings

Approx 100 feet of piping and pex total


Talk to you later bill
bmdetesta
 
Posts: 8
Joined: April 27th, 2011, 12:55 am

Re: Aklaska Channing 111 Stoker With Crosslink Conversion

Postby bmdetesta » December 17th, 2015, 10:45 am

Hello to all

System is up and running

Have some tweaking to do

Now have lots of hot water

My garage has heat

And my house is nice and warm

I am In the 15601 area If anybody is interested in looking at the system all are welcome

Thank you Tom for all of your support thanks Bill
bmdetesta
 
Posts: 8
Joined: April 27th, 2011, 12:55 am


Return to Cross Link Conversions

Who is online

Users browsing this forum: No registered users and 1 guest

cron