Models and kits questions.

Please use the Forum of conversations about Cross Link Conversions' boiler systmes

Models and kits questions.

Postby pelletburner » March 20th, 2013, 3:33 pm

ACCENTRA PELLLET ? was wondering if this model is one you make a conversion for? I am on the hunt for one you make a kit for already. NOt sure if there is enough room in my Austroflamm Wega to make it work.

Also how about the St. Croix Afton Bay model?
pelletburner
 
Posts: 14
Joined: March 19th, 2013, 11:21 am

Re: Models and kits questions.

Postby tommy » March 20th, 2013, 10:34 pm

pelletburner wrote:ACCENTRA PELLLET ? was wondering if this model is one you make a conversion for? I am on the hunt for one you make a kit for already. NOt sure if there is enough room in my Austroflamm Wega to make it work.

Also how about the St. Croix Afton Bay model?

I do not make kits for the Accentra's
I think Afton Bay model would maybe take the same style kit as the Country sides I would have to go see one. I posted some pictures here.
Let me know what you are thinking
Attachments
!cid__0815090924.jpg
!cid__0815090924.jpg (42.22 KiB) Viewed 5060 times
IMAG0183.jpg
IMAG0183.jpg (104.25 KiB) Viewed 5060 times
!cid__0130001832a.jpg
!cid__0130001832a.jpg (33.48 KiB) Viewed 5060 times
User avatar
tommy
 
Posts: 264
Joined: February 24th, 2011, 11:33 pm
Location: Mn

Re: Models and kits questions.

Postby rboos » December 17th, 2013, 9:35 pm

So can you go through a accentra even if it is cast iorn
rboos
 
Posts: 1
Joined: December 17th, 2013, 7:45 pm

Re: Models and kits questions.

Postby tommy » December 17th, 2013, 10:32 pm

rboos wrote:So can you go through a accentra even if it is cast iorn

Yes I can how ever when I made a kit for the accentra afew years ago .I was not happy with the hot water out put of a kit in the stove.So I sold the stove with out a kit and went on to the next model and brand .So to answer another ? I do not have or will not make a kit for the Accentra again any time soon because there are at leat 100 more models of stoves for me to look at. Here is a link to the posting on this forum where I post new models of kits for there stoves that have been ok by me.
viewtopic.php?f=3&t=18
User avatar
tommy
 
Posts: 264
Joined: February 24th, 2011, 11:33 pm
Location: Mn


Return to Cross Link Conversions

Who is online

Users browsing this forum: No registered users and 1 guest

cron